Main technical misunderstandings in EDM Manufacturers processing

Friends who do mold processing know that EDM is an important process for EDM Manufacturers processing, but in the process of processing, we will find that some manufacturers have a good technological level and can process high quality products, but some manufacturers even with the use of very high-end NC EDM machines, the results are still far from ideal.
Here, KENOS summarizes some of the main technical misunderstandings EDM Manufacturers processing, which is helpful to the actual production of the factory.genos1818



1. uses electrode to touch the work piece to divide, often "hits the side";
2. Uniform selection of the same electrode material;
3.The electrode spark position is small and the machining efficiency is greatly reduced;
4. Still using manual chuck mounting, adjusting electrode;
5. Incorrect Surface quality Control in discharge Machining;
These EDM Manufacturers processing misunderstandings are worth every EDM Manufacturersattention. In fact, a small improvement in a process in the factory can create great value, or bring quality, efficiency, and this is the value of experience. 
genos1818
Above article from KENOS official website (http://www.edm-accessories.com/)
The original address:http://www.edm-accessories.com/EDM_Manufacturers_processing.html

评论

发表评论

此博客中的热门博文

What you need to know about wire cutting equipment

As we all know,  wire cutting equipment  is one of the most used machining equipment in the machinery manufacturing industry. Therefore, for friends engaged in wire cutting, the long-term benefits lie in the good use of wire cutting equipment, and whether to maintain it. 1.Introduction of wire cutting equipment WEDM was first invented in the former Soviet Union in 1960, but China was the first country to use it in industrial production. The instantaneous high temperature produced by electric spark can be corroded by local metal melting and oxidation. Wire cutting machine is invented on the basis of this principle, so it belongs to mechanical equipment in the field of electrical processing. 2.What are the components of the wire cutting equipment? The wire cutting equipment consists of three parts: mechanical, electrical, and working hydraulic system. 3.How to improve the machining efficiency of  WEDM equipment ? Cutting efficiency is affected by two main factors, on...
阅读全文

Mixed Bed Ion Exchange Resins wholesale, choose KENOS Hardware Technology Co., Ltd.

图片
KENOS Hardware Technology Co., Ltd. is a wholesale Wire edm wear parts, EDM spare parts manufacturers, the main wholesale products are  Mixed Bed Ion Exchange Resins , conductive blocks, diamond wire guides, EDM filters and so on. Mixed Bed Ion Exchange Resins For Wire Cut EDM Machines is a kind of special ion exchange resin which has been regenerated and premixed and can be used directly. It is mainly used for the production of ultra-pure water in the water treatment system containing radioactive materials, semiconductor preparation and other industries. It can also be used for the refinement after various water treatment processes. Direct use without pretreatment and regeneration. Our Mixed Bed Ion Exchange Resins meet the technical specifications of the national and industrial standards. Similar products abroad: Dower MR-3, Amberlite UP-6150. Recommended operating conditions for Mixed Bed Ion Exchange Resins: 1.PH           ...
阅读全文

KENOS Wire edm wear parts precision is increasing

图片
Dongguan KENOS Hardware Technology Co., Ltd. is a high-tech enterprise specializing in R&D and production of high-quality Wire edm wear parts. The company's main products include EDM filter, resin, diamond wire guides, conductive block and so on. In recent years, KENOS's  Wire edm wear parts precision  and quality are increasingly improved. The improvement of Wire edm wear parts precision is beneficial to improve the machining accuracy of WEDM. Multi-cutting technology is the fundamental means to improve the accuracy and surface quality of low-speed WEDM. It is a scientific integration of design and manufacture technology, numerical control technology, intelligent technology, pulse power technology, precision transmission and control technology. Generally, the surface quality is improved by one-time cutting, two-time cutting and more than three-time cutting. In order to achieve high quality surface, the number of times of cutting is up to 7~9 times. Now it only needs 3~4 ...
阅读全文