KENOS EDM Hole Drilling spare parts--Electrode copper tube

The copper tube for EDM Hole Drilling machine, also known as electrode copper tube, is generally used for EDM drilling. Its working principle is to use continuous vertical movement of fine copper tube (called electrode tube) as the electrode. The special electrode copper tube for punching machine is generally less than 3mm in diameter. It can be divided into H65 brass and T2 red copper according to material, and into single and multi-hole according to structure.
Different electrode copper tube should be used when machining different parts. Brass electrode tube is required for workpiece steel (SKD-11 for example) and red copper electrode tube is required for workpiece tungsten steel (KG5, W88%, CO12% for example). red copper electrode tube is used for Brass work piece, Electrode copper tube for aluminium work piece and brass electrode tube for graphite work piece.
Meanwhile, when replacing electrode copper, we should pay attention to:
1. install the electrode copper tube to avoid the bending of the electrode copper tube, then install the copper tube electrode on the sealing ring.
2. Make the copper tube electrode extend the sealing ring of water stop from 2mm to 3mm, insert the copper tube electrode into the copper tube, and insert the electrode chuck above the copper tube electrode chuck body.
3. Tighten the sealing ring on the electrode chuck, install the body of the electrode chuck on the spindle and tighten (not too tight).
4.check whether the copper tube is in the center of the chuck.

EDM Hole Drilling spare parts - EDM tubes produced by Dongguan KENOS Hardware Technology Co., Ltd. uses the best raw materials. It has the characteristics of high verticality, good internal and external surface finish, strong corrosion resistance and long service life. The basic specifications are 0.2-3.0 mm and the length is 200/400/500 mm. If other specifications of copper electrode are needed, we can also customize it for you.
yize19ka
Above article from KENOS official website:(http://www.edm-accessories.com/)
The original address:(http://www.edm-accessories.com/113.html)

评论

发表评论

此博客中的热门博文

What you need to know about wire cutting equipment

As we all know,  wire cutting equipment  is one of the most used machining equipment in the machinery manufacturing industry. Therefore, for friends engaged in wire cutting, the long-term benefits lie in the good use of wire cutting equipment, and whether to maintain it. 1.Introduction of wire cutting equipment WEDM was first invented in the former Soviet Union in 1960, but China was the first country to use it in industrial production. The instantaneous high temperature produced by electric spark can be corroded by local metal melting and oxidation. Wire cutting machine is invented on the basis of this principle, so it belongs to mechanical equipment in the field of electrical processing. 2.What are the components of the wire cutting equipment? The wire cutting equipment consists of three parts: mechanical, electrical, and working hydraulic system. 3.How to improve the machining efficiency of  WEDM equipment ? Cutting efficiency is affected by two main factors, one is the curre
阅读全文

Mixed Bed Ion Exchange Resins wholesale, choose KENOS Hardware Technology Co., Ltd.

图片
KENOS Hardware Technology Co., Ltd. is a wholesale Wire edm wear parts, EDM spare parts manufacturers, the main wholesale products are  Mixed Bed Ion Exchange Resins , conductive blocks, diamond wire guides, EDM filters and so on. Mixed Bed Ion Exchange Resins For Wire Cut EDM Machines is a kind of special ion exchange resin which has been regenerated and premixed and can be used directly. It is mainly used for the production of ultra-pure water in the water treatment system containing radioactive materials, semiconductor preparation and other industries. It can also be used for the refinement after various water treatment processes. Direct use without pretreatment and regeneration. Our Mixed Bed Ion Exchange Resins meet the technical specifications of the national and industrial standards. Similar products abroad: Dower MR-3, Amberlite UP-6150. Recommended operating conditions for Mixed Bed Ion Exchange Resins: 1.PH                                                    1-14 2.Maximum us
阅读全文

KENOS helps you solve common problems in WEDM

We always encounter some  Common problems in WEDM . So, how to solve these common problems in WEDM? Today, KENOS will help you solve them. 1.In the wire cutting process, the workpiece suddenly cut can not move how to do? This situation usually occurs when cutting hard-to-process materials such as stainless steel with high thickness. The fundamental reason is that the working fluid does not have good characteristics of erasing products. The emergency method is to add some detergent or increase the concentration of the working fluid, but the most fundamental way is to change the  EDM Fluid . 2.Molybdenum wire forward and backward cutting speed is inconsistent, or even do not go in one direction? This situation is often encountered in high thickness cutting, the root cause is still the problem of working fluid, but also related to the uniform consistency of frequency tracking speed and molybdenum wire tension. Therefore, when cutting high thickness workpieces, it is necessary to speed
阅读全文